Product IntroductionIntroduction-Guangpu Guichuan-

Breeding specific UV sterilizerPrinciple:Guangpu Guichuan UV Disinfector Integrating optics, microbiology, mechanics, chemistry, electronics, fluid mechanics, and other comprehensive sciences. The strong ultraviolet C light generated by a specially designed high-efficiency, high-intensity, and long-life ultraviolet C light generating device is used to irradiate flowing water. When bacteria, viruses, etc. in water are irradiated with a certain dose of ultraviolet C light (wavelength 253.7nm), the DNA structure of bacteria and viruses will be destroyed, causing immediate death or inability to reproduce offspring, achieving the purpose of sterilization.

Equipment featuresFeatures-Guangpu Guichuan-

Guangpu'sUltraviolet sterilizerUsing high-quality ultraviolet disinfection lamps to ensure stability during customer use. The warranty period for the lamp tube is over 10000 hours.

The breeding specific ultraviolet sterilizer uses high transmittance and high-purity quartz sleeves to ensure ultraviolet transmittance and sterilization effect.

Stainless steel (304/316 stainless steel material) is selected as the reactor, and the inner wall of the reactor is specially polished to improve the sterilization effect.

maintenancemaintenance-Guangpu Guichuan-

Regular cleaning of quartz casingFirst, turn off the power, remove the dust covers on both sides of the breeding specific disinfection device, take out the lamp tube, remove the end caps, take out the "O" - shaped rubber ring, and then slowly extract the quartz tube. When cleaning the casing, use alcohol as a cleaning solution. After cleaning, the operator should not directly touch the surface of the quartz tube with their hands to avoid dirtying and affecting transparency. Align the quartz tube with the water seal holes at both ends, insert the quartz tube with equal clearance at both ends, insert the "O" - shaped rubber ring, slowly and evenly tighten the pressure cap, and do not apply too much force to avoid causing the quartz tube to break. Then conduct a water test. If there is water leakage, gently tighten the pressure cap until there is no water leakage. After that, install the lamp tube and start running.

instructionsDescription-Guangpu Guichuan-

The breeding specific ultraviolet sterilizer of this device is horizontally installed indoors, with the bracket fixed on a designated foundation or workbench. (Connect the inlet and outlet) The sterilization device is located indoors. In addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position where the ultraviolet lamp tube and space can be extracted. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.

This product is a pipeline type ultraviolet sterilizer, with two water outlets that can be selected as the inlet and outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. To facilitate the replacement of light tubes and quartz tubes, there should be space of the same length on one side as the equipment.

After product installation, conduct a water test to ensure no water leakage, and then connect the power supply.

After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will operate normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this point, the machine will start running.

Installation sizeinstallation-Guangpu Guichuan-