product description

Five characteristics of prefabricated water tank

Reject the unnecessary procedure, simplify and better the production of bolted linked water tanks, all of which are operated with standard components. This not only simplifies the many complexities of on-site welding machines, argon gas, and welding operations, but also eliminates intergranular corrosion caused by welding. Stainless steel bolts and non-toxic silicone sealing gaskets ensure that the formed water tank is leak free, leak free, and leak free;
● Affordable and stylish novel
Using less material consumption and precise molding, stainless steel plates are hydraulically stretched into unit rectangular concave convex plates with specifications of 1.0 M * 1.0M, 1.0 M * 0.5M, and 0.5 M * 0.5M. They can be assembled into the water storage capacity you need. The beautiful appearance of the product is highly characteristic of the times and complements modern architecture;
● Durable and Anti corrosion cracking
The product is made of high-quality stainless steel plate, which has been molded and deformed to achieve excellent strength. Its excellent properties include austenite, ferrite, and ultra-low carbon, and it has unique advantages in corrosion resistance, earthquake resistance, and crack resistance. The overall service life of the product can be as long as 30-50 years;
Easy disassembly and high value preserving rate
Traditional water tanks are formed by welding and are difficult to dismantle, especially when the disassembled panels are mostly disposed of as waste. On the other hand, prefabricated water tanks benefit from the connection of standard components, making disassembly and assembly convenient. Especially, the dismantled modules can be reused in different locations, preserving value and recycling, and demonstrating cost-effectiveness;
Fast Assembly, shorten the process
The traditional water tank is completed by full welding connection from the foundation steel to the combination of the formwork and the position of each opening, as well as the improvement of accessories. However, the assembly of the prefabricated water tank from the foundation to the formwork and the configuration of accessories are standardized by standard components. Compared with the two, the compression period is at least 50% less.

The 'bright' points of the prefabricated water tank template
Each standard panel adopts special tooling molds and precise compression and stretching, especially with the pneumatic linkage of secondary folding, ensuring that the module's double 90 degree folding and four sided punching are formed in one go, with small accuracy errors and high template strength, eliminating the hidden danger of bolt hole tearing caused by excessive water pressure in the bolted connection of the prefabricated water tank

Assembly process| Assemble process

	According to the set size of the water tank, first galvanized the bottom area (length x width) of the water tank Steel foundation assembly and connection forming; According to the specification of the water tank, assemble and join the Galvanized steel baseboard of the water tank to form the basic model;
	Assemble and connect the bottom formwork of the water tank on the steel foundation, with each formwork embedded tightly between them Sealing strip and galvanized angle steel reinforced frame; On the base the Model Steel board, assemble the bottom template connected to the water tank, at the joints insert sealing tape and strengthen the framework with galvanized angle steel;
	On the bottom plate of the water tank, assemble the lower section of the template on the connecting side, and embed all the gaps between the plates tightly Sealing strip, special sealing components are used for corner and T-shaped connections; On the bottom templates, joint the lower part with the side template, and adopt special seal tape at every sew, turn cape and T connection;
	According to the height of the water tank, the side panels are assembled and formed in sequence, and the intersection of the middle panels is taken Use cross shaped specialized seals; Considerate the height of the WaterTank, followed by side molding assembly, and the middle template junction seal up with a cross-shaped plate special seals;
	Before the top of the 5-box body is sealed, the reinforcement bars inside the water tank are assembled and connected according to the segments of the side panels, Special sealing components are embedded at the bolt fastening point; Before finish the tank body, implement the inner side templates with strengthening tendon connection, and the stud bolt with specific mosaic seals;
	After the five sides of the box are formed, the assembly and connection of the box top are carried out, and the corners and T-shaped parts are used Special sealing components; ||Box body after five sides assembly, fix the top box, and the specialized seal implementation in each conjunction, turn cape and T connection;
	7. Improve the configuration and assembly of various accessories for the box setting, such as maintenance manholes, interior and exterior Escalators, short joints and flanges of various inlet and outlet pipes, level gauges, ventilation holes, etc. Verify the tank against the set accessories and assenbly parts, such as: Manhole, internal and external elevator, inlet and outlet water pipe flange with a short section, level gauge, vents and so on.

All assembly connections are equipped with 10mm nickel plated bolts and edible silicone pads. Such as: corner type, T-shaped, cross type, straight bar type.
All junction assembly adopted 10mm Nickel-plated bolts and silicone pad for human consumption. Such as: the corner-shaped, cross-shaped, straight bar.

Case study of bolted water tank