main features

supply voltage/Load Regulation

The closed-loop amplitude control function of the Beineng Xin patent can correct amplitude output changes caused by power supply voltage fluctuations or load condition changes. When the power supply voltage is within ±10%The amplitude drift range caused by fluctuations within the range (excluding load changes) is only ±2%.

Automatic frequency search

The device can automatically measure and store the frequency of welding, and there are three automatic search methods to choose from:

1Enable Settings'Refresh the initial welding settings in the memory while preparing.

2Open it. “test”Switch, automatically search for frequency and store.

3Secondary/The minute triggered method repeats the automatic search frequency to compensate for the welding head's heating or other factors

Frequency drift caused by factors.

MODE

2000IWAdopting the time welding mode.

2000IW+Provide two modes: time mode and depth mode (including absolute depth and relative depth)

Welding mode selection.

Digital parameter recording with automatic correction function

Can achieve more precise operation parameter settings

Linear optical decoding (only compatible with)2000IW+）

Measure the "depth" of welding Accuracy can reach0.0025mm

Adjustable delayed oscillation time

Workpieces or materials that can be shaken off and adsorbed on the surface of the welding head after welding

Self inspection and process monitoring

It can achieve fast and accurate fault detection and minimize the downtime caused by faults. At the same time as activating the backup, the device performs a self check and

Report possible mechanical failures or parameter settings errors. When everything is normal, the device will display“ready”(Ready).

Image, sound alarm and external output

Overloading, mechanical faults, and parameter setting errors can be clearly identified.

Peak power display

When pressed“reset”When pressing the reset button, it can be done throughLEDDisplay the peak power of the previous welding. Similarly, when pressed“test”Key

It can display the real-time power in tuning mode.

standard feature

Automatic frequency modulation and frequency storage

use20kHzWelding head, can be wrapped around19.950 kHzWithin ±500HzAutomatic tuning within the frequency range; At the end of each welding cycle, the frequency will be stored.System Protection Monitor

Provide five types of protection for ultrasonic generators

1）Excessive frequency offset 2）Voltage too high 3）Excessive current 4）The temperature is too high 5）Excessive power

The above characteristics can protect the equipment, ensure welding accuracy and reliable repeatability.

Automatic pre trigger

Non mechanical switch, will not wear out, does not require adjustment, and is not prone to malfunction,

Dynamic pressure triggering and maintenance

When the pressure applied to the workpiece reaches the preset value (pressure range:67-890NBetween them, the device began to release ultrasound. The dynamic triggering function can keep the workpiece under constant pressure during the welding process, smoothly and effectively absorbing ultrasonic energy, and obtaining stable welding quality

Durable and sturdy mechanical structure

The welding head and workpiece are positioned in a straight line through a linear guide rail. This structure can ensure the long-term reliability of the equipment, maintain smooth movement of the welding head in a straight direction, and evenly withstand pressure from all directions.