Product Overview:

This machine is suitable for simulating the needle puncture situation of various batteries during transportation and storage. The experiment should be conducted at an ambient temperature of 20 ℃± 5 ℃. The battery connected to the thermocouple (with the thermocouple contacts fixed on the large surface of the battery) should be placed in a fume hood, and a corrosion-resistant steel needle with a diameter of 2-8mm should be used to pierce the center position of the maximum surface of the battery at a speed of 10mm/s to 40mm/s. The test results should be observed for any time, and if the battery does not explode or ignite, it is considered qualified.

Meet the standards:

GB 31241-2014，GB/T 8897.4-2008，YD/T 2344.1-2011，GB/T 21966-2008，MT/T 1051-2007，YD 1268-2003，GB/T 19521.11-2005，YDB 032-2009，UL 1642，UL 2054，IEC 62281，IEC 60086

Technical Specifications:

1. Steel needle: High temperature resistant steel needle with a diameter of 5mm to 8mm, with a length of 100mm

2. Acupuncture stroke: 200mm (customizable)

3. Clamp battery distance: 200mm

4. Unit conversion: Kg, N, LB

5. Acupuncture speed: 10-40mm/s

6. Acupuncture force value: 1-300Kg

7. Force value display: LCD display or touch screen display

8. Force measurement accuracy: ± 1%

9. Drive mode: cylinder drive

10. Box material: Inner box made of stainless steel, outer box made of cold-rolled steel plate with spray coating treatment

11. Features: The rear side of the box is designed with exhaust vents, and the box is equipped with lighting fixtures

12. Weight: Approximately 100kg

13. Power supply: 1 ∧, 220V, 50HZ