Bareiss IRHD Compact III International Rubber Hardness Tester from Germanyfeature


M (Micro)

• Capable of measuring samples with a thickness of 0.6mm

• Samples with irregular or regular shapes can be accurately measured

• The testing device can be freely disassembled and changed to N (standard) mode

• Barofix and Centrofix sample positioning device sets can be purchased separately to achieve accurate measurement results

N (standard)

• The testing device can be freely disassembled and changed to M (micro) mode

• The product is equipped with a static load

• Economic IRHD selection plan

Bareiss IRHD Compact III International Rubber Hardness Tester from Germanyparameter


M (Micro)

• Measurement time: 1-99 seconds

• Test needle diameter: 0.4mm (spherical)

• Measurement distance: 0.3mm

• Apply pressure: 153.3mN

• Storage: 300 pieces of data

N (standard)

• Measurement time: 1-99 seconds

• Test needle diameter: 2.5mm (spherical)

• Measurement distance: 1.8mm

• Apply pressure: 5.7N

• Storage: 300 pieces of data

application


M (Micro)

• Rubber hoses, O-rings, molded products, and oil seals

• Sample thickness: 0.6-5.0mm

N (standard)

• Soft rubber, high elasticity material, ductile material

• Sample thickness: 6.0-10mm

Different locators can be selected based on different samples

Barofix O-ring sample manual locator， The maximum thickness can reach 0.6mm, with four optional ranges

1. The sample thickness range is 0.6-5.0mm in diameter, with the largest outer diameter being 50mm;

2. Sample thickness range: diameter 0.6-8.0mm, maximum outer diameter 200mm, matched with organic glass plate;

3. The thickness range of the sample is 0.6-8.0mm in diameter, with the largest outer diameter of 400mm, matched with organic glass plates;

4. The thickness range of the sample is 4.0-20mm in diameter, with the largest outer diameter of 400mm, paired with an organic glass plate.

Centrofix tubular sample manual locatorSuitable for tubular samples such as automotive hoses and medical infusion tubes