BLUE-EOP Inductively Coupled Plasma Emission Spectrometer
This instrument is a fully automatic emission spectrometer equipped with an ICP excitation source and a semiconductor solid-state detector for simultaneous detection of various elements in liquid samples. It is used for qualitative, semi quantitative, and quantitative analysis of various elements.
Spectro's air-cooled OPIAir horizontal interface technology can improve sensitivity while avoiding interference from the substrate. By using OPIAir cold cones inserted into the tail flame recombination zone, tail flame interference is eliminated, and sensitivity is increased by more than 6 times.

BLUE-EOP Inductively Coupled Plasma Emission Spectrometerdetector
--15 linear CCDs, carefully selected and optimized according to their wavelength, are arranged continuously in the Paschen Runge optical system
--Each CCD has 3648 pixels
--Pixel resolution of 165-285nm is 3 picometers,>285nm: 6 picometers
--Thermostatic optical system at+15 ° C ± 0.5 ° C
--Parallel readout design
--Each CCD has its own signal processing system
--Intelligent data acquisition and data elimination system
--The dynamic range is 9 orders of magnitude
--Short integration time less than 0.1 milliseconds
--A short measurement time of 4 seconds (including full spectrum detection and assignment)
--The integration time is automatically optimized based on the signal strength of each pixel
--Full wavelength coverage
--Automatic dark current correction
--Automatic wavelength position standardization
--TCP/IP communication interface

UV sealed argon filled circulation system
--The light chamber is filled with argon gas and sealed without the need for blowing gas consumption
--Automatic argon purification system
--Filter life: 10 to 15 months

RF generator
--Self-excited type
--The frequency is 27.12MHz
--Output power: 0.7-1.7KW
--Power stability<0.1%
--Plasma automatic ignition
--Low power, low argon gas flow standby mode
--All computer-controlled
--Air cooling (no additional cooling equipment required)
--Solid state power generator

OPIAir interface
--Spectro's air-cooled OPIAir interface is very powerful. This technology uses horizontal observation to increase sensitivity by more than 6 times, greatly reducing substrate interference in traditional horizontal observation
--Argon gas purging of external light path
--Argon flow rate 0.5-0.8 l/min
--Can directly analyze samples with a solid content of up to 20%

Basic functions
--Professional version of Windows 7 ™ operating system
--MS-Office ™ user interface
--Carefully arranged clear and intuitive operations
--Stacked toolbar, automatic or user-defined interface
--Task oriented menu structure
--Windows multitasking system
--Powerful multi-level user and access authorization management
--Users can set various alarm reminder systems and define the response methods for information, events, error warnings, etc. If necessary, various data will be automatically transmitted through the instrument usage report checklist
--Advanced ODBC/ADO database
--Advanced data integration and security systems
--User and Data Management System
--The analysis results of each spectral line element can be displayed in various concentration units
--The analysis results can be displayed in terms of concentration or intensity
--Can display statistical data (such as the average and relative sum of each measurement result against standard deviation)
--Sample labeling, each test result, mean, standard deviation, raw data (parameters can be pre-set for each analysis method): Various analysis report templates (including user-defined templates) can be used in various data reporting modes (PDF, HTML, RTF), printer data storage
--The analysis results and raw data can be output to ASCII and/or XML schema
--Can be cut or pasted onto a clipboard
--According to the standard curve definition range, it is possible to automatically select spectral lines and switch between spectral lines
--Record samples and standard analysis results in full spectrum or specific frequency bands
--Output spectra (individual and average spectra) to ASCII
--All analysis results can be subjected to full spectrum reprocessing
--All analyzed spectral lines can be obtained after the analysis process is completed
--重新修正
--*Data reprocessing
--Full spectrum storage for each analysis
--All spectral line parameters can be analyzed during the analysis process
--Edit and revise after completion
--Add new elements or spectral lines to the measured sample
--The analysis results are revised based on peak height or peak area, and the background is reset
--Reset or revise internal standards
--Add new or revised correction curve models
--Previous curves or standardization
--Retrospective analysis of previous sample results

Spectrometer body size: 1077 x 1306 x 780 mm (HxD)
Spectrometer body weight: 190kg

Environmental Requirements
--Room temperature requirement: 18-25 ° C
--Relative humidity<80%
--No harmful gases or dust
--Power requirements: 230VAC+/-5%, 50/60 Hz