BD/SC-010 Dust Test Chamber PriceProduct Usage: This product is suitable for conducting dust and dust resistance tests on various automotive components, including car lights, instruments, electrical dust covers, steering systems, door locks, etc., as well as testing the sealing of the product.

1、 Product specifications:
Model BD/SC-500 internal dimensions D × W × H 800 × 800 × 800: mm
Model BD/SC-800 internal dimensions D × W × H 800 × 1000 × 1000: mm
Model BD/SC-010 Internal dimensions D × W × H 1000 × 1000 × 1000: mm
Model BD/SC-015 internal dimensions D × W × H 1000 × 1000 × 1500: mm

　
2、 Technical parameters:
1. The nominal wire diameter of the metal sieve is 50 μ m, and the nominal spacing between wires is 75 μ m
2. Airflow velocity: ≤ 2m/s (standard type)
3. Continuous and periodic dust emission can be set at any time
4. Sand and dust concentration: 2kg/m3
5. Experimental dust: dry talcum powder, Portland cement, smoke ash, etc
6. Power requirements: AC380 (± 10%) V/50HZ three-phase five wire system

IIIBD/SC-010 Dust Test Chamber PriceBox structure:
1. The shell is processed and formed using high-quality A3 steel plate CNC machine tools, and the surface of the shell is treated with anti-static spray coating, making it more smooth and beautiful;
2. The inner liner is made of high-quality SUS304 stainless steel plate;
3. Visible glass door for easy observation of the condition of the tested sample inside the test chamber;
4. The bottom of the test chamber adopts high-quality fixed PU movable wheels;
5. There is a dust replacement device at the bottom of the test chamber;

4、 Dust preheating system:
1. Use a pipeline wrapped mica heating ring to ensure safe and stable heat dissipation;
2. Equipped with heating over temperature control;

5、 Control system:
1. The main controller of the equipment adopts imported PLC program to control the LCD display screen, and displays the working time in full Chinese;
2. Equipped with vacuum actuators, Schneider actuators;
3. The dust fan automatically alternates in time;
4. The vibration and stop vibration time automatically alternate;
5. It is possible to control the dust fan, dust vibration, and total test time separately;
6. This controller has the following arbitrary setting control functions
a. Dust raising time (stop, rise): Continuous or periodic dust raising can be set at any time
b. Vibration time: The vibration and stop vibration times automatically alternate, with adjustable vibration times of 99 minutes and 59 seconds
c. Preset test time: The maximum test time is 99 hours and 59 minutes
d. Power on: off on off
7. Non fuse protection switch, over temperature, overload, leakage, fully sheathed terminal block, with protection such as automatic shutdown;

6、 Installation site
This equipment is different from general devices, so the installation site has the following special instructions:
1. The venue must have sufficient space to accommodate the testing equipment and leave appropriate maintenance space.
2. The power supply of the device should have good grounding facilities;
3. The height of the site space should be sufficient to enable the device to operate normally and perform maintenance, repairs, etc. in the future after installation;
4. The device should be located in a place with a perennial temperature of 2-35 ℃, a relative humidity of no more than 85%, and good ventilation facilities;
5. It should be installed in a place with less dust;
6. Avoid sudden changes in the environmental temperature of the installation site;
7. It should be installed on a horizontal ground (a level should be used to determine the level on the ground during installation);
8. It should be installed in a place without direct sunlight;
9. It should be installed in a place far away from combustibles, explosives, and high-temperature heat sources.
10. Equipment usage conditions: Environmental temperature: 5 ℃~+28 ℃ (average temperature within 24 hours ≤ 28 ℃) Environmental humidity: ≤ 85% R.H

7、 Compliant with standards: Designed and manufactured strictly in accordance with corresponding standards such as GB/T4208-2008, GB/T10485-2007, GB/T2423.37-2006, GBT4942.1-2006, etc;

8BD/SC-010 Dust Test Chamber PriceService commitment: 18 months warranty, free home delivery. After the installation and commissioning of the equipment is completed, relevant technical personnel will receive free operation training at the user's site, with no limit on the number of people.