Automatic toothed crusherFeatures:

Compared with other types of crushers, this series of crushers has the advantages of high crushing ratio, no requirement for moisture content of crushed materials, no stickiness or blockage, less over crushing, low noise, low vibration, less dust, low energy consumption, small footprint, and simple and convenient maintenance.

2. Equipped with a hydraulic automatic retreat device, it can effectively prevent the damage of iron blocks to the toothed roller and the harm of wooden blocks and flexible objects to the normal operation of the toothed roller.

3. Equipped with an intelligent cleaning device, it can automatically remove adhesive materials on the walls of the crusher chamber during working intervals.

4. Multiple protection devices such as mechanical, electrical, hydraulic, and interlocking devices are used to effectively protect the motor, crusher, and the entire system.

5. This product has become a replacement for imported crushing equipment in thermal power plants due to its advantages of high efficiency, energy saving, and environmental protection. Suitable materials for crushing brittle materials with low to medium hardness, such as anthracite, smokeless coal, brown coal, and coal gangue. They can also be used for sintered ore, coke, slag, shale, and limestone.

Automatic toothed crusherMachine maintenance:

1. Bearings bear all the load of the machine, so good lubrication has a great impact on the service life of bearings, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good. The main oil injection points of this machine are:

(1) Rotating bearings

(2) Roller bearings

(3) All gears

(4) Active bearings, sliding surfaces

2. If there is any impact sound during the operation of the rotating gear, it should be stopped immediately for inspection and eliminated

3. Pay attention to whether the various parts of the machine are working properly

4. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time

5. Newly installed wheel rims are prone to loosening and must be checked regularly

6. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it

7. The base plane of the movable device should be free of dust and other substances to prevent the movable bearings from moving on the base frame when the machine encounters unbreakable materials, which may cause serious accidents.

Installation and test drive:

1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.

2. During installation, attention should be paid to the verticality between the main body and the horizontal.

3. After installation, check whether the bolts in each part are loose and whether the main engine compartment door is tightened. If so, please tighten it.

4. Configure power lines and control switches according to the power of the equipment.

5. After inspection, conduct a no-load test run. If the test run is normal, production can proceed.

Classification:

The toothed roller crusher is divided into two series: double toothed roller crusher and four toothed roller crusher. The double toothed roller crusher is a mechanical spring type (2PCM), which can be equipped with coarse or medium toothed rollers according to the characteristics and requirements of the crushed material. The four toothed roller crusher is actually composed of two double toothed roller crushers combined.