Automatic external polishing machineoperation

The key to the polishing operation of a polishing machine is to achieve a high polishing rate in order to quickly remove the damaged layer generated during polishing. At the same time, it is necessary to ensure that the polishing damage layer does not affect the final observed tissue, that is, it will not cause false tissue. The former requires the use of coarser abrasives to ensure a higher polishing rate to remove the damaged layer, but the polishing damage layer is also deeper; The latter requires the use of fine materials to make the polishing damage layer shallower, but with a lower polishing rate. A good way to solve this contradiction is to divide polishing into two stages. The purpose of rough polishing is to remove the polishing damage layer, and this stage should have a high polishing rate. The surface damage formed by rough polishing is a secondary consideration, but it should also be minimized as much as possible; Next is precision polishing (also known as final polishing), which aims to remove surface damage caused by rough polishing and minimize polishing damage.Automatic polishing machineThe operation is relatively simple, and the operator only needs to place the object to be polished on the corresponding fixture in advance. Fix the fixture on the worktable of the automatic polishing machine. Start the automatic polishing machine, complete the polishing work within the set time, stop automatically, and remove the object from the workbench. Before polishing with an automatic polishing machine, it is necessary to adjust the distance between the polishing head and the workbench. To achieve good contact effect and throw out good results. Hand waxing can be used during the polishing process to reduce machine production costs.

Small polishing machine

New fully automatic polishing machine

Automatic polishing machine configuration

For factories with high production requirements. The polishing process is relatively mature. After arranging the process, make specific polishing machine configurations according to each process. The principles of configuration are as follows:

For regular objects such as rotors, spheres, blocks, tablets, etc. It can be easily thrown anywhere. So for wiring, each process only requires one machine of the same type. Go through four processes, that is, four machines form a line.

For irregular objects. Such as kitchen utensils, knives, forks, spoons, etc. For example, spoons need to be polished in sections. Such as throwing spoon head, spoon neck, handle, etc. To install the Bang Zheng automation equipment configuration, it is necessary to configure semi-automatic polishing machines, M650 three coordinate automatic polishing machine, Dp-600 automatic polishing machine, sp-600 automatic polishing machine, and ssp-600 automatic polishing machine. To meet the processing requirements of different levels such as monthly production of 500000 pcs, 1 million pcs, 2 million pcs, etc.