Qingzhou Chenrun Water Treatment Technology Co., Ltd
Home>Products>Automatic bottle capping machine
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13863663598
  • Address
    West End of Beihuan Road, Qingzhou City, Weifang City, Shandong Province
Contact Now
Automatic bottle capping machine
The LP series bottle sorting machine, with an hourly capacity of 8000 bottles to 36000 bottles, is a domestically advanced level of bottle sorting equ
Product details

The LP series bottle sorting machine can handle 8000 to 36000 bottles per hour. Based on the introduction of advanced foreign technology and the need for high-speed development of filling equipment in China, it is a domestically advanced level of bottle sorting equipment developed and researched. It is a supporting product for high-speed filling machines, which uses mechanical action to complete the process of plastic bottles from disorderly loading to orderly arrangement in the filling machine air duct, meeting the needs of fully automatic production of filling machines.

Main parameters of the equipment

LP-16 equipment total power: 12.35KW/25.9A

Main circuit: 3 × 380V 50HZ

Control circuit: (1) Detection mechanism and solenoid valve: DC24V (2) Motor: AC220V

Work Engineering

The bottle sorting machine has one inner and one outer rotating cylinder. The outer side of the inner rotating cylinder is equipped with a bottle dropping groove, and the inner side is equipped with a lifting mechanism equal to the number of bottle dropping grooves. The outer rotating cylinder is equipped with a bottle dividing groove corresponding to the bottle dropping groove. When the bottle sorting machine starts working, the main motor drives the inner and outer rotating drums to work, and its start and stop are automatically controlled by various safety and functional switches; After the elevator detects a bottle shortage signal based on the bottle shortage detection device installed on the umbrella tower, the elevator works. The bottles enter the top center of the machine from the bottle warehouse and fall onto the umbrella tower, sliding to the edge of the umbrella tower and entering the lifting mechanism. The lifting mechanism pushes the bottles into the bottle dropping slot under the action of the cam. Every time the machine rotates, each lifting mechanism works three times, that is, three bottles fall into the separate bottle slots installed on the outer rotating cylinder in each bottle dropping slot. Thus achieving the process of bottle entry, lifting, bottle dropping, bottle separation, and bottle discharge.

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!