The detection of rubber properties using a rotorless rheometer has been widely used in rubber product development and quality control. The Auto MFR100+automatic rotorless rheometer is widely used for quality control in rubber product production and is suitable for large-scale rubber sample testing. The Auto MFR100+automatic rotorless rheometer adopts new technologies such as new design, data processing, temperature control, and intuitive human-machine interface, which more accurately reflect the viscoelastic characteristics of the rubber material. The sample testing process is highly automated, and the operator only needs to place the sample on the guide frame, and the testing can be automatically completed according to the preset test method, meeting the requirements of users to improve testing efficiency, reduce labor costs and intensity, and avoid human errors.

ASTM D 5289, ASTM D6204 Part A, GB/T 16584, etc

Automatic feeding of samples
Automatically test according to the set program
Automatic unloading after the experiment is completed
Rich data points
Sealed mold cavity design
Excellent repeatability and reproducibility
Accurate temperature control
Intuitive human-machine interface displays curves and data
Built in processing system
Network interface facilitates information management
Easy to maintain, safe, and reliable
Choosing a frequency scanning test module can further investigate the processing characteristics of rubber materials
Choosing variable temperature simulated vulcanization test can truly reflect the vulcanization characteristics of thick products
Choosing a multi strain angle switching system can improve the sensitivity of various rubber material test data
Choosing a pressure testing module can simultaneously test the vulcanization characteristics and pressure changes of foam rubber

Strain angle: standard: ± 0.5 °; Optional: ± 0.2 ° or ± 1.0 °
Oscillation frequency: 1.67Hz
Film conveying system: Film specifications: Nylon film roll (100 mm wide) can perform approximately 3500 tests;
Sample guide frame: up to 5 samples can be placed;
Sample volume: approximately 4.5cm3
Temperature control: microprocessor control
Temperature range: Room temperature~200 ℃
Temperature resolution: 0.01 ℃
Temperature control accuracy: ± 0.1 ℃
Accuracy: ± 0.2 ℃
Overheating temperature: less than the set point by 0.4 ℃
Temperature recovery speed:<45 seconds
Heating rate: 20 ℃ to 190 ℃, less than 5 minutes
Data type: Composite torque S *, Elastic torque S', Viscous torque S ", Lag loss TanDelta, Composite modulus G *, Elastic modulus G ', Viscous modulus G", Dynamic viscosity η, Any burning time point tsx, Any vulcanization time point TCx
Range: 0-200 dNm, lb in
Measurement accuracy: 0.01dNm, lb in (optional 0.001)
Test type: Standard vulcanization and pressure vulcanization test (for testing foam adhesive)
Calibration: Torque spring calibration
Embedded System: Embedded Data Processing System
Interface: Fast Ethernet X1, USB 2.0X2, RS232X1
Power and gas source: 220VAC ± 10%, 7A, single-phase gas source pressure not less than 0.44MPa (4.5kg/cm2)
Dimensions: Width: 68cm, Height: 116cm, Depth: 45cm
Weight: Gross weight: approximately 200kg, Net weight: approximately 150kg
Packaging dimensions: length x width x height: 65cmx80cmx150cm

Research and quality control of rubber and plastic products. The Auto MFR100+automatic rotorless rheometer is widely used for quality control in rubber product production and is suitable for large-scale rubber sample testing.