Summary
lWidely used in microbial tissue cell culture, seed germination, seedling experiments, plant cultivation, as well as insect and small animal feeding. Can accurately simulate different environmental and climatic conditions.
operating design
lCompressor working mode: The instrument can set the temperature point at which the compressor stops working; The compressor can also be set with normally open and intermittent operating temperature points
lDefrosting function: three-stage electric heating defrosting program control to ensure low-temperature operation of the equipment
lLarge screen LCD display, real-time parameter display, screen self-locking function, simple and convenient operation, can quickly set temperature, humidity, light intensity, and time parameters
lIntelligent control: The intelligent temperature control system can be set up to100 cycles, 30 bands continuously control temperature, humidity, lighting level, and operating time
lEnergy saving lighting is adoptedLED cold light source, with six levels of adjustable light intensity to meet the different lighting needs of plants
lThe humidification method instrument can only be controlled, automatically controlling the start and stop of the humidifier according to the set humidity requirements to ensure stable humidity inside the box
Internal circulation system
lHigh quality fans, large blade fans, are selected for higher ventilation efficiency and better temperature uniformity
lThe circulation system adopts back suction and bottom vertical air supply
²Laser hollowed out circular holes in the partition for better ventilation and temperature uniformity
Specialized sheet metal processing
lThe box body is formed by laser cutting in one go, and the outer box body is made of high-quality cold-rolled steel plate with anti-static coating on the surface. The inner pot is made of high-quality brushed stainless steel
lThe entire stainless steel plate of the partition is laser formed in one go without welding points. A load-bearing beam is added to the bottom of the partition for stronger load-bearing capacity
lDetachable partition, adjustable up and down, minimum spacing30mm
lThe partition has a sliding groove buckle design to prevent the partition from tilting and misaligning
lLarge circular arc angle design, no dead corners, easy to clean and maintain
lStainless steel wire drawing treatment, strong corrosion resistance
lDouble layered door design with built-in tempered glass door, allowing for easy observation of objects in the studio at a glance
lThe door ring seal adopts magnetic rubber strip sealing, which is simple and convenient
user-friendly design
lAvailable in both Chinese and English menus to meet different language needs
lCan be carried outTemperature conversion between ℃ and ℉
lAdjustable tray position to meet the needs of cultivating plants of different heights
lFour angle universal mobile wheels, with brake pads on the front wheels to prevent equipment shaking
lPower down memory function
lScreen self-locking function
Safety function
²The equipment is equipped with a leakage protection device to ensure the safety of operators and the safe operation of other laboratory equipment
lInternal limited temperature control sound and light alarm system, heating stops working when the temperature exceeds the limit, and sound and light automatic alarm is triggered when the temperature exceeds the alarm
lSelf diagnostic function: Display fault information for easy identification of problem areas
lStainless steel heating tube for heating, corrosion-resistant and long service life
lRefrigerant: internationally recognizedR134a environmentally friendly refrigerant, non flammable, non explosive, non-toxic, non irritating, non corrosive, with good safety performance
Note: Performance parameter testing is conducted under no-load conditions at ambient temperature25 ℃, environmental humidity 55% RH
Optional parts
Independent temperature limiting controller
test hole
BOD socket
Printer or485 interface (optional for intelligent program controller)
ultraviolet lamp
model |
PQX-250H |
PQX-350H |
PQX-450H |
Volume (liters) |
250 |
350 |
450 |
Temperature Control Range |
Light exposure: 10~50 ℃, no light exposure: 4~50 |
temperature resolution |
0.1℃ |
Constant temperature fluctuation |
±1℃ |
Moisture control range |
50%~95% |
Humidity fluctuations |
±5%-±7% |
supply voltage |
220V 50Hz |
Ambient Temperature |
+4-35℃ |
Input power W |
890 |
1680 |
2130 |
Light intensity |
0-12000LX
Single sided illumination
Level 6 adjustable
|
0-15000LX
Three sided illumination
Level 6 adjustable
|
0-20000LX
Three sided illumination
Level 6 adjustable
|
Inner container size (mm) W × D × H |
555×450×1100 |
550×550×1200 |
700×550×1200 |
Dimensions (mm) W × D × H |
680×680×1760 |
880×780×1900 |
1030×800×1900 |
Load carrier (standard) |
3 pieces |
4 pieces |
time range |
1-9999min |
picture |

|