This portable viscometer is suitable for measuring the viscosity of coatings within 30-100 seconds. When measuring, the measured liquid is filled in a specific container and the viscosity of the liquid is calculated based on the time required for the measured liquid to flow out.

Technical parameters:

Measurement range: 30s ≤ t ≤ 100s

Error: ± 5% for Newtonian liquids

Dimensions: 1 55mm * 98mm * 335mm

1、 Purpose:

The instrument is suitable for measuring the viscosity of coating products in the range of 30S-100S. It is a portable instrument that measures the viscosity of coatings by measuring the time required for the measured liquid to flow out of the hole after being filled. The viscosity unit of the liquid is seconds.

2、 Main technical characteristics

1. The viscosity cup is made of brass with a capacity of about 100 milliliters, and the bottom outflow hole is made of stainless steel.

2. The K value refers to the time it takes for the viscosity cup to be filled with second grade standard oil under the set temperature conditions (such as 20 ℃± 0.1 ℃), and the flow time should be within the range of 30S-100S. The K value should be within 0.97-1.03, and the K value should be 0.99 with instrument number 8688

3、 Brief Explanation of Structure

The viscosity cup is placed on a measuring cup ring with a horizontal bubble, and the horizontal screw of the base is adjusted to center the bubble. The cup has a capacity of about 150 milliliters and is used to hold the measuring liquid