Anti condensation anti blowing flat bag dust collector is a bag dust collector used to separate dispersed particles from gas. It contains a shell with upper and lower flower plates fixed inside to form an air inlet chamber, a dust removal chamber, and a dust cleaning chamber. The shell walls of the three chambers are respectively equipped with an air inlet pipe, an air outlet pipe, and a dust cleaning door. The dust removal chamber is equipped with a set of filter bags fixed on the two flower plates. Its characteristic is that the dust removal chamber is equipped with a vibrating grid connected by steel wires suspended on the flower plates, and all filter bags are threaded through its mesh holes. The bag filter of this utility model has the characteristics of anti condensation and preventing the filter bag from overheating, so it works reliably, has high dust removal efficiency, long service life, and low manufacturing cost.

The anti condensation anti blowing flat bag dust collector has a uniform force distribution structure, good anti explosion performance, compact structure, and uses a high-pressure fan to blow back and clean the dust. It is not limited by gas source conditions and uses resistance to automatically control the back blowing and cleaning to save energy and extend the use of the bag. It can be installed indoors in cold regions and can be installed outdoors in other regions. It can be widely used in many departments such as machinery, casting, mining, smelting, building materials, and grain chemical industry. A new type of high-efficiency pulse dust collector improved on the basis of the KL anti condensation anti blowing flat bag dust collector, which integrates the advantages of various pulse jet dust collectors for chamber back blowing, overcomes the disadvantages of insufficient cleaning intensity and uneven distribution of inlet and outlet air, and expands the application range. The structure of XMC dust collector has its own characteristics, which improve the dust collection efficiency, adaptability, and extend the service life of filter bags. After years of production practice, the equipment runs stably, has small maintenance requirements, and a wide range of combinations, and is highly praised by users. The K L anti condensation and anti blowing flat bag filter product can be widely used in the dust and smoke collection system of asphalt mixing plants such as crushing, grinding, drying machines, furnaces, etc. The material of the filter bag of the dust collector is generally polyester needle punched felt, which allows continuous use temperature ≤ 120 ℃. If the filter bag uses Metas high-temperature needle punched felt, its allowable use temperature can reach 204 ℃. This series of dust collectors can be combined with various specifications of electromagnetic valves according to different specifications. The dust collectors in this series can operate under negative or positive pressure without any changes to their body structure. The dust collection efficiency is over 99.8%, and the purified gas dust concentration is less than 100mg/m3. If this series of dust collectors is used in cold regions or when the flue gas is below zero, insulation heating devices need to be added, and the shell should also be subjected to phase strain.