The anti arch blasting disc has a convex surface located on the high-pressure side of the pressure system. The anti arch belt knife type blasting disc is composed of a single piece of metal, which flips over when the diaphragm is unstable under pressure, and is cut open by the blade on the outlet clamp to release pressure and force.

explain:This type of safety equipment needs to be calculated and selected based on the specific operating parameters of the protected equipment and system to better exert its protective effect. Only after selecting the model can a quotation be made. To ensure use, please contact us as soon as possible through online consultation, hotline, online message, email and other methods. Our staff will arrange sales engineers in the corresponding area to provide free calculation, selection, quotation and other technical support services to help you quickly choose suitable products and arrange shipment or production scheduling for you as soon as possible.Xuzhou Bafang Partial Qualification Certification Certificate

Technical Characteristics

• Fragmented design

Can operate below 90% of the calibrated burst pressure

Suitable for gas phase, liquid phase, and gas-liquid two-phase media

The calibrated blasting pressure shall not exceed the maximum allowable working pressure of the equipment

Can withstand full vacuum without the need for a back pressure bracket

Standard materials: stainless steel, Inconel, Monel, nickel, aluminum, and special materials can also be customized

• Size range: 25mm-600mm

• Blasting pressure range: 0.5barg-150barg

Can be connected in series with a safety valve

Three dimensional stainless steel nameplate, including all parameters of the bursting disc

optional

The lining of polytetrafluoroethylene can effectively isolate corrosive media and protect the bursting disc from corrosion.

Note: The maximum temperature of the bursting disc with inner lining is lower than that of the strength film material

Supporting gripper

YDJ Clamp · Embedded Clamp - Specially designed for YD series bursting discs

Standard materials for clamps: stainless steel and carbon steel, other materials are also applicable.

Clamp options

Instrument hole; tee; Takeover; Relief valve; Pressure gauge; Special flange surface; coating

Safety valve protection

When the blasting disc is installed under the safety valve, the working parts of the valve can be isolated from corrosive media.

Leakage components: pressure gauge, tee, relief valve, connecting pipe

Single piece metal structure, concave surface with grooves, no fragment design.