XYS-040442User Manual for Simulated Data Acquisition Module

1 function

XYS-040442It is an intelligent module that integrates switch output, analog output, analog acquisition, and switch input acquisition. The computer sends instructions to the data acquisition module through the serial port to control or read commands. After receiving the commands, the controller executes single relay actions, multiple relay actions, relay fully open, relay switch, switch input status acquisition, analog acquisition, and analog output.

1. Communication isolation, using ultra high speed magnetic coupling chips to meet high baud rate communication requirements;

2. 12Vperhaps24VDC voltage power input, anti reverse protection.

3. Rich status indicator lights, including relay output status indicator lights, switch input status indicator lights, communication indicator lights, and power indicator lights;

4. Having standardRS232/RS485Waiting for the communication port,TCPIP /Bluetooth/wireless/wifi/GPRSOptional.

5. Built in alarm buzzer, which can remotely control alarms or provide on-site prompts, achieving sound and light alarms;

6. supportmodbus RTUProtocol customization or hardware customization, suitable for allPLCConnection of modules;

7. Adopting a guide rail typeABSShell, can be installed inside the cabinet or wall mounted;

II Technical Parameter

1. Working power supply:DC12VperhapsDC24VPower consumption: less than5W；

2. Communication port:RS232/RS485/networkTCPIPBaud rate:4800/9600/19200bps/38400；

3. Communication distance:RS232 15Mi,RS485 1000Meter, Ethernet100M，WiFi/Bluetooth 20Rice;

4. Communication protocol:modbus RTUOr customized agreements with customers;

5. Work environment:-25-65℃, humidity5-95%；

6. relay:4road Load capacity:220V AC 5A; Normally open output;

7. Switch input:4Road, dry node or optocoupler, closing resistance less than100ohm,Open circuit resistance greater than100K；

8. Analog input:4roadAIinput range0-10Vperhaps0-20mA/4-20mAOther customization; resolution12Position;0-4096

9. Analog input assistance:2roadAOOutput range0-10Vperhaps0-20mA/4-20mAOther customization; resolution12Position;0-4096；

10. zero drift:±0.2uA/℃ or zero drift:±0.2uV/℃；；

11. buzzer1One;

12. Rail typeABShousing 145（L）X 90(W)X 40(H)mm(Internal)PCBBoard size:88*120*30mm；）

III communication protocol

supportMODBUS-RTUfunction code01、02、04、05、06、0FFunction code. The default communication baud rate is9600Invalid verification8Data bits1A stop position.

l Write single register--06

for example1Channel of the number device1The analog output of, that is, the write register4x0000The command is as follows:

MODBUSRegister Address Table1

Baud rate code table2

Determine whether it is current or voltage input/output before purchasing the module