VIP member
Product details
To prevent unauthorized intrusion and theft by outsiders, access control and infrared detectors are reasonably configured according to the on-site environment of the computer room to achieve anti-theft alarm. The linkage alarm methods include: local sound and light alarm in the computer room, or local telephone voice alarm, or email alarm, or SMS SMS alarm, etc.
Temperature and humidity monitoring function
For large computer rooms, due to the influence of airflow and equipment distribution, there may be significant differences in temperature and humidity values. Therefore, temperature and humidity sensors should be installed according to the actual area of the main computer room to detect the temperature and humidity inside the room.
Install temperature and humidity sensors in various computer rooms and connect them to on-site signalsAcquisition controllerOn SPD-200GSM-P, SPD-200GSM-P communicates with the center through TCP/IP, and the real-time temperature and humidity situation of each room can be displayed through the network in the center room. When the temperature and humidity exceed the limit, an alarm will be triggered. These functions are implemented in monitoring software.
Leakage monitoring function
Due to the large area of the user's computer room and the fact that the leaking water source is generally located inComputer room floorFor the convenience of users' future maintenance, it is recommended to use our company's water leakage detection system. The working principle is to use corrosion-resistant and high-strength induction cables, controllers, and other accessories to enclose areas with water sources. Once there is a liquid leak, it will come into contactInduction ropeThe induction rope transmits the contact type signal to the SPD-200GSM-P acquisition machine through the controller, and promptly notifies relevant personnel to eliminate it.
Power parameter monitoring function
There are many important parameters in the operation of the incoming cabinet, such as voltage, current, power (active and reactive), power factor, frequency, and electrical degree (active and reactive). Usually, instruments are installed on the electrical screen, manually monitored, and automatically controlled inside the cabinetair circuit breakerThe working status of overcurrent protection and the status of the main switch are also monitored manually on site. Now, the power supply parameters of the incoming cabinet are transmitted to the computer system in the form of data through intelligent power meters to achieve unmanned operation on site.
The outgoing cabinet can also achieve unmanned operation through the above methods. Once the system alarms, it will automatically switch to the corresponding switch screen, and the color will change accordingly. The system automatically plays multimedia voice alarms. If the automatic dialing function of the phone is set, the system will automatically dial the set phone number or BP number and notify relevant personnel to handle it.
UPS monitoring function
By using the communication protocol and intelligent communication interface provided by the UPS manufacturer, the UPS is monitored in real-time to monitor the operating status of various components such as rectifiers, inverters, batteries, bypasses, loads, etc. Once a component fails, the system will automatically sound an alarm. And real-time monitoring of various parameters such as voltage, current, frequency, power, etc. of UPS, with intuitive graphical interface display.
This system is compatible with intelligent UPS systems from renowned manufacturers around the world. Monitor the operating status and parameters of five parts, including rectifier, inverter, battery, bypass, and load, based on all monitoring functions provided by the manufacturer. According to the requirements, the required functions of this system are as follows: input, output voltage, output current, output frequency, battery status, bypass status, load status, and working parameters of each part.
Smoke detection function
Ionic smoke detection equipment, suitable for installation in low smoke and non-smoking areas, used to detect the presence or absence of smoke. When a certain amount of smoke enterssmoke sensorThe reaction chamber of the sensor emits sound and light alarms and outputs alarm signals to the collector, which can accurately detect smoke and provide assistance for fire prevention and early detection.
havepower and environment monitoring systemmonitoring systemprojectDo you need to move the ring?Just look for Sibe Technology, we have case studies to help you operate projects more easily.Please call: Or consult online!We provide free services for youDynamic environmental monitoring systemProposal and product quotation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-