Aeration disc-Fornitore globale

200 meters west of the intersection of National Highway 206 and Shunyuan Road in Zhucheng City, Shandong Province

Introduction:
The aerator is arranged according to the gas supply volume and tank shape density. The aerator and the gas distribution pipeline are connected by G3/4 threads, with the base being internally threaded (fixed to the gas distribution pipeline) and the aerator being externally threaded. When installing, first fix the required size of the regulator to the bottom of the pool, and then use clamps to secure the gas pipeline to the regulator.
The membrane disc microporous aerator (aeration disc) is another membrane type microporous aeration product. ABS engineering plastic is used as the chassis and pallet, and the air distribution board is made of EPDM material. The aeration device consists of an aerator, regulator, connector, and air distribution pipeline, tee, four-way, elbow and other pipe fittings.
characteristic:
Good anti blocking and anti backflow properties. The aerator is shaped like a spherical crown, and even if the water quality in the aeration tank is complex, it still operates intermittently, making its surface less prone to mud accumulation. Diaphragm punching technique
The technique is unique and advanced, with an oblique incision style. Additionally, a special sealing ring is installed at the center of the top to more effectively prevent water backflow.
The membrane has strong tear resistance. The rubber diaphragm is in the shape of a spherical cap. During operation, the force on the hole opening is uniform, the degree of fatigue deformation is reduced, the resilience is good, it is not easy to tear, and the service life is long.
Uniform air distribution, energy-saving and efficient. The working surface of the spherical aerator is relatively larger than that of the flat plate aerator, with smaller bubbles, uniform air distribution, high oxygenation efficiency, and good treatment effect. Especially when working at low gas levels, this characteristic can still be utilized, making operation and management convenient.
Resistant to aging and corrosion. The spherical aeration membrane is made of high-quality rubber, and the supporting tray and wedge-shaped insert plate are uniformly made of engineering plastic. These materials have excellent physical and mechanical properties. Excellent aging resistance and resistance to chemical corrosion such as acid, alkali, and chemicals.
Low resistance loss. Due to the unique anti blocking and waterproof backflow performance of the aerator, the check valve attached to the flat microporous aerator is removed, thereby reducing the resistance of the aerator. Saved energy consumption.