1、 Adjustment of dry selection magnetic separator

The magnetic separator machine equipment must be debugged before it can be used normally. So, how should the debugging be carried out before the magnetic separator is applied? The debugging method is relatively simple, but the most important thing is that the debugging staff must work diligently, delicately, and patiently in order to successfully debug the magnetic separator. Here are the necessary debugging contents for magnetic separators:

1. Debugging the speed ratio of the magnetic separator: The speed ratio should be adjusted according to the size and size of the selected raw materials. Faster speed, but the product quality has serious Fe2O3 content exceeding the standard; The speed is relatively slow, and the products that meet the standards are discharged separately from Fe2O3 through the feeding port, which will cause unnecessary damage to the company. Therefore, the speed of the magnetic separator should be adjusted according to the specific situation.

2. Debugging magnetic separator hopper: There is a themed activity joystick under the magnetic separator hopper, which controls the total flow rate of the selected material. Customers should strictly adjust the total flow rate with the joystick according to the total output of the machine equipment. Insufficient material cutting immediately endangers the total output of the customer's goods, while excessive material cutting results in insufficient magnetic separation equipment for the selected raw materials, endangering product quality. Therefore, it is essential to maintain a proper balance during debugging.

3. Adjust the spacing between the partition and the drum of the magnetic separator. There is a material plate in front of the stainless steel cylinder of the magnetic separator, and the blocking plate is also controlled by a themed movable handle. Adjust the spacing between the partition and the cylinder appropriately based on the specifications and dimensions of the selected raw materials. The effect caused by the distance between the cylinder and the speed ratio is the same as the actual effect.

Attention: After the debugging of the magnetic separator is completed, a comprehensive inspection of all components of the machine equipment should also be carried out to ensure that everything is normal before adding materials for production and manufacturing.