1. Product features
◆Use the most cost-effective Korean Pr9200 chip in the industry.
◆All components are of the highest grade, with extremely low temperature drift coefficient, and can work in harsh environments.
◆There are two models available, D-100/101.
◆The reading ranges are 80cm-2m and 10cm-60cm (test label: Impinj E41b), suitable for different application scenarios.
◆The tag recognition speed is greater than 50 sheets per second.
◆Supports USB2.0/RS232/Wigan 26/Wigan 34.
◆ Supports USB power supply; Support independent power supply.
◆Can be configured for automatic reading mode.
◆Extremely low power consumption, long-term continuous full load operation at room temperature without generating heat.
◆Compatible with the communication interface of our INDY R2000 series products, easily interchangeable for use.
2. Electrical parameters
working voltage |
DC 3.5V – 5 V。 |
|
Standby state current |
<80mA。 |
|
Working current |
180mA @ 3.5V (26 dBm Output,25°C).
|
|
110mA @ 3.5V (18 dBm Output, twenty-five°C).
|
||
Start Time |
<100mS。 |
|
operation temperature |
- 20 °C - + 70 °C |
|
storage temperature |
- 20 °C - + 85 °C |
|
Working humidity |
< 95% ( + 25 °C) |
|
Air Interface Protocol |
EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
|
Working spectrum range |
902Mhz -928Mhz, 865MHz -868MHz (customizable) |
|
Work area support |
US, Canada and other regions following U.S. FCC |
|
Europe and other regions following ETSI EN 302 208 |
||
Mainland China |
||
Japan |
||
Korea |
||
Malaysia |
||
Taiwan |
||
Output power range |
18-26 dBm |
|
Output power accuracy |
+/- 1dB |
|
Output power flatness |
+/- 0.2dB |
|
receiver sensitivity |
< -70dBm |
|
Inventory label peak speed |
>50 sheets per second |
|
Tag cache area |
200 tags @ 96 bit EPC |
|
Label RSSI |
support |
|
antenna |
D-100 |
Built in 2dbi circularly polarized antenna, reading distance: 80cm-2m(Testing Inly Impinj E41b)
|
D-101 |
Built in 0dB circularly polarized antenna, reading range: 10cm-60cm(Testing Inly Impinj E41b)
|
|
communication interface |
USB 2.0 |
|
RS-232 |
||
Wigan 26 |
||
Wigan 34 |
||
Baud rate |
115200 bps (default and recommended) |
|
38400bps |
3. Interface definition
List of Interface Definitions
PIN |
definition |
describe |
1 |
+9V |
External 9V power supply.(Note: External power supply and USB cannot be used simultaneously to power the reader/writer)
|
2 |
GND |
Common ground with+9V external power supply. |
3 |
RS-232 TXD |
RS-232 data output. |
4 |
RS-232 RXD |
RS-232 data input. |
5 |
GND |
Shared ground with RS-232 interface. |
6 |
GPIO3 |
GPO3 or Wiegand Data 0. |
7 |
GPIO4 |
GPO4 or Wiegand Data 1. |
8 |
GND |
Co located with Wigan data interface. |