Detailed introduction:

DZL-3D Gas Electron Column Micrometer

1、 Overview

The DZL-3D Chinese interface gas electric electronic column micrometer (hereinafter referred to as the "electronic column") uses an embedded microcontroller
Digital products designed with technology have the following characteristics:
1. Automatic correction of magnification eliminates the tedious manual calibration process.
2. The high brightness LCD screen does not limit the display angle or the light intensity in various production environments.
3. Chinese menu interface, intuitive, convenient, and fast.
4. During measurement, the instrument changes the color of the three color light column (green) based on pre-set parameters and measurement results
Color, orange, red) directly indicate the "qualified", "alarm", and "out of tolerance" status of the measured size, which can be very accurate
Observe the deviation status of the measured dimensions conveniently and determine whether the measured workpiece is qualified.
5. At the same time as the light column indicates the measurement result, the LCD display directly displays the actual measurement value of the measured size
And the change in the measured size relative to the nominal size (actual deviation of size).
6. Suitable for various specifications of gas measuring heads from Ø 0.5 to Ø 2.0, it can replace float type gas measuring instruments with various magnifications.
7. Multiple anti-interference and stabilization techniques have been adopted to improve measurement stability and reliability.
8. The system has reserved ten sets of program space, which can pre-set measurement parameters for ten measured sizes, including: range
Selection, nominal size and its upper and lower limits, alarm limits (directly calculated by the system), standard part size values, internal and external
Selection of size measurement mode. All parameter settings have a power-off save function.
9. Capable of storing and querying measurement data.
10. Extreme value measurement function: can be combined with measuring devices to calculate coaxiality, ellipticity, and other parameters using various mathematical models
Shape and position errors such as jumping, cylindricity, flatness, perpendicularity, etc.
11. The following functions are available for users to choose from for customization.
Input/output signal function: It can easily form a control system.
Data communication function: Multiple measuring instruments form a network, and SPC statistical charts are generated through dedicated software to achieve online quality control
Quantity management.
Data printing and output function (equipped with dedicated printers and software).
It is also possible to modify and supplement product features according to users' special requirements.
12. After the wear of the gas probe, the initial gap increases, which will affect the accuracy of the measurement. As long as the position error is allowed,
The gap changes caused by wear can be compensated for by adjusting the magnification, and the measurement results are still correct. This feature extends the gas probe
The service life.