4~20mAThe current output magnetostrictive displacement sensor can be used for liquid level measurement or field displacement measurement. The electronic compartment of the analog output magnetostrictive displacement sensor is made of stainless steel and has a sealing level ofIP67The level sensor can be installed with a magnetic ring to measure the liquid level, and a floating ball can also be selected for liquid level measurement according to requirements. The signal line output of the current output magnetostrictive displacement sensor is two-wire, three wire, or four wire, which can be applied in ordinary or explosion-proof environments and is suitable for high-precision measurement of clean liquid levels. It can also be used for measuring the boundary between two different liquids using a dual float type.

4~20mACharacteristics of magnetostrictive displacement sensor:

1Durable and sturdy, adopting a fully enclosed design;

2Easy installation, standard analog signal;

3Stable and reliable, using digital simulation technology;

4Adopting non-contact measurement to achieve the effect of never wearing out;

5Absolute position output, no need to reset it;

6Low power design reduces the occurrence of internal chip heating;

7Support simultaneous output of dual magnetic ring positions;

8The starting position of the measurement can be adjusted throughout the entire process;

Technical parameters of magnetostrictive displacement sensor:

1Scope of itinerary:500mm(can be customized according to user requirements);

2Measurement accuracy: ±0.2mm

3Resolution:0.1mm

4Temperature coefficient:30PPm/℃；

5Output signal: optional current4~20mAThe0~20mA; Voltage0~10VThe0~5V；

6Power supply voltage:DC24v；

7Operating temperature: -40℃ ～ +90；

8Protection level:IP65TPAluminum formed shell;IP67THStainless steel pressure resistant outer tube;

9Voltage resistance parameters:35MPa(continuous) / 70MPa(Peak value);