Operation and application standards for 38CNC fully automatic pipe bending machine 3A-1S:

Before operation, first check whether each lubrication point is short of oil, whether the moving mechanism is loose, and whether the safety protection equipment is reliable. Only after confirmation can operation be carried out.

2. Start the oil pump and check if the system pressure remains within the specified range. If it is too high, it will damage hydraulic components and waste power. If it is too low, it will affect the operation.

3. Adjust the required orientation and angle of the parts.

4. Adjust the positioning of the components to the desired length.

5. Adjust the vertical lifting guide rail so that the guide mold clamping cylinder can move and clamp the iron pipe tightly.

6. The clamping and molding cylinder can clamp iron pipes.

7. Under normal operation, place the workpiece into the bending die with the front end in contact and positioning. Press the foot switch to complete the process.

When bending, the mind should be focused and hands or other objects should not be placed in the work area. In case of emergency, press the emergency stop button, then turn the rotary switch to the manual position and reset it manually. If a fault occurs, report it for repair in a timely manner.

After completing the homework, cut off the power and perform cleaning and lubrication operations.