1. Specification requirements:
A、 Equipped with 3 channels of 10/100BAST-T (X) adaptive network ports;
B、 Equipped with a built-in network isolation transformer and a 2.00mm dual row plug interface;
C、 Power input: DC3.3V/1A, input from the power pin;
D、 Power consumption: Full load power consumption not exceeding 2W;
E、 Forwarding mechanism: store and forward mechanism, line speed performance;
F、 Equipped with network line sequence automatic crossover function (MDI/MDIX);
G、 Working temperature: -40 ° C~75 ° C;
H、 Management attribute: Non network management type;
2. Scheme selection
5-port 100Mbps switching chip, with 3 network ports and pin out configuration;
3. Module production process
A、 4-layer PCB board, FR-4 high TG board, board thickness 1.6mm;
B、 Gold deposition on solder pads, green oil coverage on via holes;
C、 The power and network data interfaces are connected to the motherboard using gold-plated pins;
4. Pin definition
Power pin: as shown in the diagram:
Among them, 1, 2, 3, and 4 are power grounds5. 6, 7, and 8 are 3.3V power supplies
3-channel network port pins: as shown in the diagram:
21. Send signal P1_TX0 via twisted pair cable at the entrance of the first road network+
22. Send signal P1_TX0 via twisted pair cable at the entrance of the first road network-
17. The twisted pair receiving signal P1_SX1 at the entrance of the first road network+
18. The twisted pair receiving signal P1_SX1 at the entrance of the first road network-
13. Send signal P2_TX0 via twisted pair cable at the entrance of the second road network+
14. Send signal P2_TX0 via twisted pair cable at the entrance of the second road network-
9. Second road network entrance twisted pair receiving signal P2_SX1+
10. Second road network entrance twisted pair receiving signal P2_SX1-
5. Send signal P3_TX0 via twisted pair cable at the 3rd road network entrance+
6. Send signal P3_TX0 via twisted pair cable at the 3rd road network entrance-
1. The twisted pair receiving signal P3_SX1 at the 3rd road network entrance+
2. The twisted pair receiving signal P3_SX1 at the 3rd road network entrance-
Product Introduction |
Product manual |
|
Batch procurement/product customization |
Business Hotline: or |
[Contact email]: 652503928@qq.com |