The workflow of this device:This equipment is a specialized cutting device that processes steel plates (various metal material coils) into the required width through high-speed precision longitudinal cutting. The main working host of this equipment consists of four main mechanisms: an uncoiler, a precision disc cutter holder, a tension generating station, and a winding machine. In the middle, it is supplemented by devices such as paper feeding, material transportation, clamping, plate head shearing, buffering, guiding, laminating, winding waste edges, slitting shearing, and discharging.

The feeding mechanism of the equipment is in a passive feeding state during operation. The sheet metal is clamped and the irregular material heads are cut off by the hydraulic shearing machine, and then the lateral guide mechanism enters the disc shearing machine to cut into the strip material required by the customer. During the longitudinal cutting process, the waste edges are quickly collected into rolls by a waste edge coiler. The longitudinally cut strip material is buffered by a loop and enters the tension station through two sets of separation devices. The required winding tension is established through the tension device and the coiler to prevent collapse after winding. Finally, the unloading mechanism unloads the material roll from the receiving shaft to the discharge trolley and transports it out.

The three main machines of this equipment, namely feeding, cutting, and receiving, are automatically coordinated during operation, and will not cause any stretching action on the sheet metal, thus preventing the stretching deformation of the coil material on this equipment. At the same time, during longitudinal cutting, the sheet metal is in a free cutting state, and there will be no shear deviation phenomenon; The tension generation station of this equipment can generate balanced and adjustable tension between each belt to ensure the necessary tension for different sheet materials during feeding, while also effectively ensuring the relative tightness of each belt roll; This device has a fixed length cutting function. When the device cuts to a predetermined length or reaches the tail material, it will automatically and uniformly reduce the speed. If there is no material, it will automatically stop until the speed reaches zero. Then, it will automatically or manually operate the button to perform roll cutting.

This device is in automatic operation for the rest of the time after manual threading is completed.

Process flow of slitting machine equipment (optional according to customer requirements):

Paper receiving machine, dual station storage platform, feeding trolley, hydraulic unwinding machine, hydraulic support arm, material receiving head, shovel head, two roll clamping+three roll leveling, hydraulic material head cutting, film covering, active set (front bridge), correction, pressing, longitudinal cutting, waste wire winding, active set (rear bridge), pre sorting, tension machine, winding trolley - hydraulic control - electrical control;