VIP member
12N9B motorcycle battery
Battery product description: ◆ Maintenance free and no need for refilling; Low internal resistance, good discharge performance at high current; ◆ Suit
Product details
Battery Product Description
| ◆ Maintenance free and no need for fluid replacement; | Low internal resistance, good discharge performance at high current; | ◆ Suitable for a wide range of temperatures; |
| ◆ Low self discharge; | ◆ Long service life; | ◆ Charged factory, easy to use; |
| ◆ Safety and explosion prevention; | ◆ Unique formula, good deep discharge recovery performance; | ◆ No free electrolyte, can still be used when tilted 90 degrees on the side; |
| The product has passed CE and ROHS certification, and all batteries comply with national standards. |
Application Fields and Classification
| UPS uninterruptible power supply; | ● Fire backup power supply; | ● Safety protection alarm system; |
| ● Emergency lighting system; | ● Intercom system (weak current monitoring); | ● Power system; |
| ● Electronic instruments and meters; | Intelligent transportation communication control room; | Emergency lights, electronic scales; |
| ● Children's electric toy car; | ● Portable electronic devices; | ● Photography equipment; |
| Solar and wind power generation systems; | ● Mountain flood and earthquake warning wireless broadcasting system. |
| Precautions before installation | Operation and Maintenance |
|---|---|
| The battery is already in its initial charging state at the factory, please do not short-circuit the positive and negative terminals: | The battery should be placed in a dry and ventilated area (not used in a closed container or place), away from direct sunlight, and kept away from heating elements; |
| When transporting batteries, they should be evenly stressed, and the stress should be applied to the battery casing. Avoid damaging the pole; | Insulation tools should be used during installation to avoid electric shock; |
| Ge batteries should be stored in a cool and shady place. Dry, ventilated, and clean places must be fully charged before storage: | When installing the battery connection wire, attention should be paid to the tightness of the connection part to avoid sparks; |
| Unused battery packs should be stored with disconnected wires; | During installation, heat dissipation should be considered, and the distance between batteries should be kept at around 2CM; |
| During transportation or storage, batteries may lose some capacity due to self discharge, so please use them before use First, charge with an initial current of 0.10CA and a constant voltage |
New and old batteries cannot be mixed, and batteries from different manufacturers cannot be mixed. |
| Precautions before installation | Warning |
|---|---|
| Do not disassemble or modify the battery; | Regularly (every three months) conduct the following checks on the operating battery:; |
| Do not put Ge batteries into water or fire; | ● Normal discharge should avoid the battery voltage falling below the termination voltage; |
| During the process of connecting the battery pack, please wear insulated gloves; | Is there any abnormality in the appearance of the battery; |
| Do not install, use or store batteries in areas where children touch them; | Are the battery terminals and connecting wires corroded and leaking; |
| Please do not mix different brands. Mixing batteries of different capacities, voltages, and old and new types; | Be sure to charge the battery promptly after discharging; |
| Do not use oil or gasoline. Use banana water, cleaning agents, and other organic solvents to wipe the battery to prevent the battery case from cracking; | When the battery is discharged. The working temperature is controlled between -20C and 50C; |
| Waste batteries are toxic and hazardous materials. Please do not dispose of them at will and comply with environmental regulations; | Measure and record the ambient temperature and battery surface temperature; |
| The battery may absorb hydrophobic acids, such as damage caused by maple leaves, sulfuric acid splashing onto the skin, clothing, and even When in the eyes, immediately use plenty of water |
The fastening status of the connecting wires in various parts of the battery pack, if loose, tighten them; |
| If there is a difference between the total voltage of the battery pack and the specified voltage value, please correct it. |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-