---------Ultra high temperature instantaneous sterilization machine (Ultra high temperature instantaneous sterilization machine)---------

This equipment is suitable for instant sterilization of liquid materials such as fresh milk, fruit juice, beverage, ice cream, ice cream slurry, soy sauce, soybean milk, condensed milk, alcohol, etc Can be used for sterilization of fluid materials. Main structure and working principle: The ultra-high temperature instantaneous sterilization machine is equipped with a pressure vessel - a high temperature barrel - inside the main unit, which is used to fill pressure steam. The main setting outside the barrel is a spiral double sleeve, Used for cold and hot exchange of incoming and outgoing materials; The main setting inside the barrel is a spiral shaped single tube, used for indirect heating. The sterilization process of materials. Materials are supplied through feeding The pump enters the outer channel of the double coil, and the hot material flowing out from the inner layer is indirectly heated to obtain preheating. When the material enters the high-temperature coil set in the high-temperature barrel, Due to the indirect heating of steam inside the barrel, it is heated to the required sterilization temperature, and then insulated inside a single rotary tube outside the barrel to kill the bacteria in the material. When it returns to the double set When coiled, the material enters the inner channel and is cooled by the outer cold material, resulting in a significant decrease in the discharge temperature (generally below 65 ℃). If there is a need to improve the craftsmanship When increasing or decreasing the discharge temperature, the angle type shut-off valve can be activated to connect the heat source (steam) or cold source (water or ice water, etc.) to allow them to enter the lower end of the double casing Outer channel. The throttle valve can be adjusted. On the one hand, it keeps the material under a certain pressure to increase its boiling point temperature and prevent vaporization. On the other hand It is also used to regulate flow. The material is finally discharged through a three-way valve. The lower end of the plug is connected to the rotary tube, and its outlet is connected to the storage tank. When needed, it can be rotated Align the pipe with the overflow pipe. The upper end of the feed three-way valve is connected to the storage tank, and the lower end is connected to the material source pipeline. Main technical parameters:

PRODUCT MODEL	RSCG-1	RSCG-2	RSCG-3	RSCG-4
Processing ability	0.5～ 1t/h	1.5～ 2t/h	3～ 4t/h	5～ 6t/h
sterilization temperature	115 ～ 135 ℃	115 ～ 135 ℃	115 ～ 135 ℃	115 ～ 135 ℃
Using steam pressure	<0.78MPa	<0.78MPa	<0.78MPa	<0.78MPa
High temperature heating time	4 ～ 6S	4 ～ 6S	4 ～ 6S	4 ～ 6S
Feed temperature	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)
Discharge temperature	<65 ℃	<65 ℃	<65 ℃	<65 ℃
steam consumption	<0.12Kg/L material	<0.15Kg/L material	<0.15Kg/L material	<0.20Kg/L material
Motor Power	1.5kW	2.2kW	3kW	4kW
External dimensions	1200×920×1650	1300×1100×1700	1600×1200×1800	1940×1400×2000
cover an area	1.104m 2	1.43m 2	1.92m 2	2.716m 2