VIP member
——Mold test box Mold alternating test box Mold box
Functional requirements: This test chamber can be used to provide favorable growth conditions for mold testing, including temperature changes (25 ℃~30
Product details
Functional requirements:
This test chamber can be used to provide favorable growth conditions for mold testing, including temperature changes (25 ℃~30 ℃) and no temperature changes (28 ℃~30 ℃). Mold testing can be used to evaluate the degree of mold growth in products (whole machine), components, and materials, as well as the impact of mold growth on their performance or use.
Technical indicators:
Temperature range: 20 ℃ to 80 ℃;
Temperature uniformity: ≤ 2 ℃ (when unloaded);
Temperature fluctuation: ± 0.5 ℃ (when unloaded);
Time setting range: 1 to 60000 minutes;
Humidity range: 45% to 98% RH;
Humidity uniformity:+2% -3% RH;
Humidity fluctuation: ± 2%;
Heating rate: 1.0-3.0 ℃/min;
Cooling rate: 0.7-1.0 ℃/min;
Wind speed: ≤ 1m/s;
Best growth environment: Temperature: 25 ℃~29 ℃ Humidity: 95%;
Mold growth time: approximately 4-6 hours;
Observation window: 210 × 275mm or 395 × 395mm (effective field of view);
Temperature and humidity sensor: PT100 platinum resistance thermometer;
Safety protection: compressor overheating, overpressure, overtemperature, fan motor overheating, leakage protection, overall equipment under phase/reverse phase, overall equipment timing
Overload and short circuit protection;
Temperature range: 20 ℃ to 80 ℃;
Temperature uniformity: ≤ 2 ℃ (when unloaded);
Temperature fluctuation: ± 0.5 ℃ (when unloaded);
Time setting range: 1 to 60000 minutes;
Humidity range: 45% to 98% RH;
Humidity uniformity:+2% -3% RH;
Humidity fluctuation: ± 2%;
Heating rate: 1.0-3.0 ℃/min;
Cooling rate: 0.7-1.0 ℃/min;
Wind speed: ≤ 1m/s;
Best growth environment: Temperature: 25 ℃~29 ℃ Humidity: 95%;
Mold growth time: approximately 4-6 hours;
Observation window: 210 × 275mm or 395 × 395mm (effective field of view);
Temperature and humidity sensor: PT100 platinum resistance thermometer;
Safety protection: compressor overheating, overpressure, overtemperature, fan motor overheating, leakage protection, overall equipment under phase/reverse phase, overall equipment timing
Overload and short circuit protection;
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-